The microprocessor automatically adjusts the air flow intensity to changes in the room temperature.

The microprocessor automatically adjusts the air flow rate of the air conditioner to hydraulic resistance.

The unit automatically switches between cooling and heating modes depending on the temperature and room temperature settings.

In the event of a temporary power failure, the air conditioner will automatically restart in the same operating mode as before, once the power supply is restored.

Additional corrosion protection of the exchanger of the outdoor unit.

The outside air can be brought into the room by equipping the indoor unit with ducts and an optional module.

LED signals the need for filter cleaning.

The maximum and minimum temperature settings can be reduced to save energy.

The low casing (198 mm) can be fully utilised thanks to the built-in drain pump. This solution allows the ceiling to be installed directly under the unit without leaving space for the condensate drainage system.

It stops work automatically once the set time has elapsed.

On/Off program available for each day of the week.

The supply stabiliser of ducted units significantly reduces the required fan power and ensures quiet operation.

The low noise mode of the outdoor unit: depending on installation conditions, the user may select the silent operation setting. The operating time can be set using the programmer.

Restriction of the maximum current and power consumption.

A V-shaped exchanger allows for the use of a compact casing in a series of devices.